the equipment has a variety of optional cleaning auxiliary function: washing, vacuum ultrasonic cleaning, heating, rotate 360 degrees and so on.

      jet cleaning was conducted in cleaning cavity mixing of fluid under heavy traffic flow, make the cleaning liquid form vortex flow in a cavity for cleaning artifacts.

      vacuum ultrasonic cleaning is in a fully sealed cavity, ultrasonic cleaning using vacuum pump to clean the pressure inside the cavity to set vacuum for ultrasonic cleaning, workpiece deep hole, holes and crevices in the air is sucked out, cleaning fluid can flow easily under normal pressure is difficult to flow of parts, reduce the cleaning blind area cleaning ability raise.

      heating function is hydrocarbon solvent belongs to flammable and explosive cleaner, under ordinary conditions of hydrocarbon solvent for heating has the potential of fire, but the flammable cleaning fluid under vacuum condition can be heated to above ignition point, high cleaning fluid temperature to dissolve dirt force multiplier.

      rotate 360 degrees function is cleaning cavity has a can let the basket of rotating mechanism, cleaning basket into the cleaning cleaning cavity when the basket will rotate to the workpiece also turn in the washing basket, especially on how surface has a hole or holes and wafer cleaning ability increases significantly.

      vacuum steam cleaning + vacuum drying system, not only by cleaning the surface cleanliness of excellent high and dry and no water residue.

      steam cleaning + vacuum drying process was conducted in a vacuum, high safety.

      vacuum drying function, cleaning fluid solution boiling point temperature drop in the vacuum state, the evaporation speed, high vacuum, formed by the rapid workpiece table inside and outside the cleaning fluid form a sudden boiling phenomenon artifacts dry evaporate quickly to achieve.

      basket back track allows cleaning implement one operation, upper and lower material in the same location, operating personnel do not need to carry empty cleaning basket.

      steam cleaning and dry steam recycling is divided into two phases, cleaning fluid consumption is small, low operating cost.